Go Uniform Logo

FREE DELIVERY

Orders over £99

NO MINIMUM ORDER

Order what you need

7 DAY TURNAROUND

Fast & reliable

Washing embroidered and printed workwear.

Workwear is washed far more often than most clothes, so how you wash it decides how long the logo and the fabric last. The advice here is general. Always follow the care label on your own garments, as it overrides anything else.

Start with the care label

Every garment has a care label, usually stitched into a side seam or the neck. It tells you the maximum wash temperature, whether bleach, tumble drying or ironing is suitable, and any special instructions. Fabrics differ, so the label is the one reliable source for your garment. What follows is general good practice that works alongside it.

Turn garments inside out

Washing inside out protects both embroidery and print. It keeps the logo from rubbing against other clothes and the drum, which is what wears down print and can fluff up thread. It is the single easiest habit to pass on to staff, and it costs nothing.

Choose the right temperature and cycle

Use the temperature on the label or lower. Lower temperatures are gentler on fabric, thread and print, and they help dark colours keep their depth. A moderate cycle is usually enough for everyday wear.

Wash similar colours together, and wash dark new garments separately for the first wash or two, as dye can run. Do not overload the machine. Crowded clothes rub against each other, and detergent rinses out less well.

Be careful with bleach and softener

Avoid bleach on coloured workwear and on logos, as it can fade fabric and weaken print and thread. Fabric softener can build up on technical fabrics and may reduce how well they dry or perform, so many care labels advise against it, particularly on hi-vis and moisture-managing garments. Check the label.

For heavy soiling such as grease or oil, treat the stain first as the label allows, rather than raising the wash temperature.

Drying

Heat is the main enemy of printed logos. High tumble-dryer heat can crack or fade print and can shrink some fabrics. If the label allows tumble drying, use a lower heat setting. Drying on a hanger or line, away from direct heat, is gentler still, and it also helps garments keep their shape.

Embroidery copes with drying better than print, but the fabric around it still benefits from lower heat.

Do not leave damp workwear in a bag or a hot van overnight. It can smell, mark or mildew, and it is a common reason staff end up with garments that look tired well before they are worn out.

Ironing

Iron embroidered and printed garments on the reverse, with the iron set to a temperature the label allows. Do not put a hot iron directly on a print, as it can melt or mark it. If the embroidery looks flat after washing, a quick steam or a press from the reverse side usually lifts it. Garments that do not need ironing are often easier to look after.

Deal with stains early

Treat marks soon after they happen, as dried-in stains are harder to shift. Blot rather than rub, and use cool water first unless the label says otherwise. Avoid scrubbing a printed logo or embroidery with a brush, which wears the surface. For stubborn oil or grease, use a product suitable for the fabric and check the label first.

Giving staff more than one top also helps. Rotating garments spreads the wear, gives each one time to dry fully, and means a stained top can wait for the next wash.

Hi-vis and technical fabrics

Hi-vis clothing and technical fabrics often have their own care instructions, for example a maximum number of washes or advice on temperature. Follow them, and look at the garment regularly. If the colour has faded badly or the reflective bands are worn, check with your site or safety adviser whether it is still suitable. Check the product details and care label on any safety wear you choose.

Make it simple for staff

Most care problems come from staff not knowing what to do. Give new starters a short sheet when they get their kit: inside out, label temperature, no bleach, low-heat drying. It can sit alongside the other items in a new starter uniform kit. If a garment keeps wearing out early, the fabric may be the wrong match for the job, so see polo shirt fabrics explained. To replace worn items, use the quote builder.

Washing embroidered and printed workwear: questions

Can I tumble dry embroidered polos?

Often yes, on a low heat, but check the care label. Printed garments are more sensitive to heat, so air drying or a low setting is safer for them.

Why is my printed logo cracking or fading?

The usual causes are high wash temperatures, hot tumble drying, bleach and washing right-side out. Following the label, washing inside out and drying on a lower heat all help.

Should I iron embroidered workwear?

Only if it needs it. If you do, iron on the reverse at a temperature the care label allows, and never directly on a print.

How should I wash hi-vis workwear?

Follow the garment's own care label, which often includes temperature limits and advice on softener. Check the garment regularly and ask your site or safety adviser if it still meets what you need.

Ready to order?

Get an instant price online, or talk to the team.

The Go Uniform list

Trade deals, straight to your inbox.

  • New bundles first
  • Price drops
  • Trade-only offers

One email when something good drops. No spam, unsubscribe any time.