Go Uniform Logo

FREE DELIVERY

Orders over £99

NO MINIMUM ORDER

Order what you need

7 DAY TURNAROUND

Fast & reliable

Where to put your logo on workwear.

Where a logo goes affects how often it is seen, how it wears and how professional the garment looks. These are the usual positions and what they suit.

Left chest

The left chest is the standard position for polos, shirts, fleeces and jackets. It sits where people naturally look when they meet someone, it suits a smaller design, and it works on almost every garment. If you only choose one position, choose this.

Keep the design compact so it sits neatly beside the placket or zip and clear of pockets and seams. A tidy, modest left chest logo looks more professional than an oversized one.

Back

A larger logo across the upper back is useful when people are seen from behind: on site, in car parks, walking around a building or working in a crowd. It suits jackets, hoodies, sweatshirts and t-shirts. Back placement is also a good home for a larger design with more detail, because there is more space.

Security, construction and event teams commonly want the company name or role on the back so staff can be identified at a distance. A larger print or embroidery on the back is the usual way to do that.

Sleeve

A sleeve is a good place for a small second mark, such as a short company name, a logo or a role. It works on hoodies, jackets, polos and t-shirts. The curve of the sleeve makes it unsuitable for large or detailed designs, so keep it simple.

Make sure a sleeve logo does not sit in a spot that gets covered by a pocket, a strap or a rolled-up cuff in normal wear.

Right chest, name and role

If your logo is on the left chest, the right chest is a common place for a name or job title. It lets customers address staff by name and helps new starters get to know the team. Names are personal to the wearer, which makes reordering a little more involved, so decide early whether you need them.

Caps, beanies and aprons

On caps the logo goes on the front panel, where it is most visible. Beanies usually carry it on the cuff, so the design needs to be small and wide rather than tall. On aprons the logo goes on the chest or the middle of the bib. For waist aprons, the front is the place to look.

Hi-vis and workwear with safety features

On hi-vis and safety clothing, keep the logo clear of reflective bands and fluorescent panels. Placement that covers them defeats their purpose. Check what your site, client or safety adviser requires before you decide where decoration goes. See safety wear and the construction workwear page for more.

Size and shape of the logo

Position is only half of it. The logo also has to be the right size for the garment. A big logo on a small chest looks cramped, and a tiny one on a large jacket looks lost. Many logos also come in more than one version, for example a wide horizontal layout and a stacked one. The wide version often suits a cap, sleeve or beanie cuff, and the stacked one suits a chest. Send both if you have them.

Match placement to the job

A tradesperson visiting a customer's home is well served by a neat left chest logo on a polo and a larger one on the back of the jacket. A kitchen team needs a visible chest logo on the chef jacket or apron. Outdoor workers benefit from a cap. See garages and automotive and hospitality for examples.

Use the same positions across garments so the team looks consistent: the same chest side, the same back position, and the same sleeve for the same garment. Write the positions down once, so that a reorder or a new garment follows the same pattern and nobody has to work it out again.

Before you finalise

Check that the logo works at the size the position allows. Fine detail needs a larger area, as explained in preparing your logo for embroidery. Test with one garment first if you can. Then use the quote builder to set up your order, and see how to choose staff uniforms for the wider picture.

Where to put your logo on workwear: questions

Where is the best place for a logo on a polo shirt?

The left chest. It is where people expect it and it suits a compact design. Add a sleeve mark or a name on the right chest if you want more.

Should I put a logo on the back as well as the front?

If staff are seen from behind, for example on site or at events, yes. A back logo is also a good place for a larger, more detailed design.

Can the logo go on hi-vis?

Often yes, but it should stay clear of the reflective bands, and your site may have its own requirements. Check with your site, client or safety adviser first.

Can I use different positions on different garments?

Yes, and it makes sense, because a polo, a jacket and a cap suit different spots. Keep each garment type consistent across the team.

Ready to order?

Get an instant price online, or talk to the team.

The Go Uniform list

Trade deals, straight to your inbox.

  • New bundles first
  • Price drops
  • Trade-only offers

One email when something good drops. No spam, unsubscribe any time.